MuMETAL®is used primarily in low intensity fields where high attenuation is desired (high initial permeability & high shielding efficiency). Our MuMETAL® Deep Draw Coil is

available for stamping and forming of shielding cans. Typically, atmospherically controlled Perfection Annealing is required after stamping, deep drawing, machining, bending, rolling

or welding to provide maximum shielding performance.

MuMETAL® Deep Draw Coil supply is stocked in gauges from 0.014" to 0.025" thickness [0,36mm to 0,64mm] and 12” wide. Coil can be slit to your tooling width at a minimum width of 1/4" (6,35mm).

Note: Priced per linear foot. Volume discounts available.

Deep Draw Coil- Annealed